- First of all download , format and install Microsoft Windows 8 / 8.1 operating system and skip the activation code
- Open command prompt and type the following instruction: ( WMIC Path SoftwareLicensingService Get OA3xOriginalProductKey )
- Copy the product key
- From command prompt type the following instrustion : ( slui 3)
- From activation window paste the product key and press enter
- If the Windows activation code will hidden on BIOS will be activate in 2-3 seconds
Wednesday, September 2, 2015
6 Steps to activate Microsoft Windows 8 / 8.1 without product key
Thursday, June 18, 2015
HP MICROSERVER GEN8 ELASTIX 2.5
- Put on your HP Microserver Gen8 2 hard disk (same capacity/size)
- Switch on the machine and press F10 to enter on HP Inteligent Provisioning
- Create Array with RAID 1 with HP Smart Array Controller
- Choose Perform and Maintenance
- Array Configuration Utility
- Select your hard disks and create the array
- Restart the machine
- Press F9 for bios and change the Boot Configuration from HP Controller to AHCI
- Restart the machine
- Attach the usb cdrom with Elastix 2.5 on motherboard usb3
- Swich on the machine and press F11 for boot option
- Choose 1 fro cdrom and install the Elastix 2.5 Telephony Server.
Monday, April 27, 2015
HP ML10 RAID SETUP and Windows Server 2008 Installation
First of all we have to enable raid controller
- Press F9 during startup
- From Advance Option
- Sata Configuration
- Embedded Sata Configuration
- Select RAID
- Go Back and from Drive Write Cache make it Disabled
Create Logical Drive
- During startup press F8
- Create logical drive with 2 hard disk Raid 1+0 or Raid 0, save it and reboot the machine.
Thursday, April 2, 2015
Port forwarding on Mikrotik Routerboard (OS)
-Login on 192.168.88.1
username: admin
password: blank
-IP-> Firewall -> NAT ->
-New Nat Rule By plus icon
-select on General TAP (Chain -> dst-nat, protocol: 6(tcp), dst-port: port number example 3389, in-interface: : ether1-gateway)
-select on Action TAP (Action:dst-nat, to addresses: ip address of device , to port : 3389
username: admin
password: blank
-IP-> Firewall -> NAT ->
-New Nat Rule By plus icon
-select on General TAP (Chain -> dst-nat, protocol: 6(tcp), dst-port: port number example 3389, in-interface: : ether1-gateway)
-select on Action TAP (Action:dst-nat, to addresses: ip address of device , to port : 3389
Friday, January 30, 2015
Why Android phones its better than iPhone
Android | iPhone |
---|---|
Memory (increase by micoSD card) | Memory (fixed memory) |
Battery (easy to change) | Battery (dificult) |
Use as a Remote Control by Infrared | N/A |
File Browsing by PC | N/A |
Read all music archives | Only iTunes type |
Charging by any micro usb | Only with iphone cable |
Users on Same Device | Only one User |
Multitasking | One application at time |
Monday, January 26, 2015
INSPIRE PRO 1.6 INSTALLATION ON WINDOWS 7
STEPS:
- RIGHT CLICK ON SETUP AND PROPERTIES
- FROM COMPATIBILITY TAB SELECT RUN AS WINDOW XP
- RUN SETUP AS ADMINISTRATOR
- WEN FINISH THE INSTALLATION
- DOWNLOAD THE PATCH Hdd32.zip FROM http://www.gtx.com/support/patches/Hdd32.zip
- FINALLY EXTRACT THE HDD32.EXE PATCH AND RUN UNTIL FINISH THE PATCH INSTALLATION
- CONNECT THE PARALLEL KEY ON PC AND RUN THE PROGRAM
- THIS IS THE COMMON PROBLEM FROM INSPIRE INSTALLATION !!!
- ENJOY!!!
Subscribe to:
Posts (Atom)