HP ML10 RAID SETUP and Windows Server 2008 Installation

First of all we have to enable raid controller

• Press F9 during startup
• From Advance Option
• Sata Configuration
• Embedded Sata Configuration 
• Select RAID
• Go Back and from Drive Write Cache make it Disabled

Create Logical Drive

• During startup press F8
• Create logical drive with 2 hard disk Raid 1+0 or Raid 0, save it and reboot the machine.

Port forwarding on Mikrotik Routerboard (OS)

-Login on 192.168.88.1
  username: admin
  password: blank
-IP-> Firewall -> NAT ->
-New Nat Rule By plus icon
-select on General TAP (Chain -> dst-nat, protocol: 6(tcp), dst-port: port number example 3389, in-interface: : ether1-gateway)
-select on Action TAP (Action:dst-nat, to addresses: ip address of device , to port : 3389