Samsung Galaxy S5 Boot Loader Dead / FIX ( SM- G900F )

- Download Odin

- Put Samsung Galaxy S5 to Download mode (Turn off the device,With the device turned off, press Volume Down, Home and Power Buttons simultaneously,Once you see the warning message, release all buttons,Press Volume Up to enter download mode,Now your device should be in download mode.)

- Download BOOT_LOADER_G900FXXU1ANG2.tar Link

- Connect Samsung on PC

-Open Odin and from BT Choose the downloded.

- Press Start 

How to fix Kaspersky kltdi.sys BlueScreen on Windows Server 2003 and Windows XP or Later Windows Version

Step by Step fix error

1. Restart Server/PC and press F8 for Safe Mode
2. Choose Start Safe Mode with CMD
3. Press on cmd "explorer.exe"
4.  Start - Run - regedit
5. Find the kltdi from HKEY_LOCAL_MACHINESYSTEM/CurrentControlSet/services/kltdi
6. On kltdi find the start and double click on it.
7. Change the value from 1 to 4 and reboot (Boot=0,System=1,Automatic=2,Manual=3,Disabled=4)

Enjoy

How to Save battery on all Samsung Galaxy Smartphones

How to Save battery on all Samsung Galaxy Smartphones

• clear cache from setting->storage
• go to recovery mode and clear cache memory (be careful not factory reset will lost your data)
  

Dlink DP-301P+ Setup - PSAdmin DP-301P+

Plug in to the power and connect ethernet direct to pc.
The pc is necessary to run Windos 7 or older version of Windows

Install PS ADMIN from
http://support.dlink.com/ProductInfo.aspx?m=dp301p%2b

and run the application

in left site on PSAdmin is the active devices .

Change Value on Device and save confiquration

6 Steps to activate Microsoft Windows 8 / 8.1 without product key

• First of all download , format and install Microsoft Windows 8 / 8.1 operating system and skip the activation code
• Open command prompt and type the following instruction: ( WMIC Path SoftwareLicensingService Get OA3xOriginalProductKey )
• Copy the product key 
• From command prompt type the following instrustion : ( slui 3)
• From activation window paste the product key and press enter
• If the Windows activation code will hidden on BIOS will be activate in 2-3 seconds

Cytech Soutions

HP MICROSERVER GEN8 ELASTIX 2.5

1. Put on your HP Microserver Gen8 2 hard disk (same capacity/size)
2. Switch on the machine and press F10 to enter on HP Inteligent Provisioning
3. Create Array with RAID 1 with HP Smart Array Controller
4. Choose Perform and Maintenance
5. Array Configuration Utility
6. Select your hard disks and create the array 
7. Restart the machine
8. Press F9 for bios and change the Boot Configuration from HP Controller to AHCI
9. Restart the machine
10. Attach the usb cdrom with Elastix 2.5 on  motherboard usb3
11. Swich on the machine and press F11 for boot option
12. Choose 1 fro cdrom and install the Elastix 2.5 Telephony Server.

HP ML10 RAID SETUP and Windows Server 2008 Installation

First of all we have to enable raid controller

• Press F9 during startup
• From Advance Option
• Sata Configuration
• Embedded Sata Configuration 
• Select RAID
• Go Back and from Drive Write Cache make it Disabled

Create Logical Drive

• During startup press F8
• Create logical drive with 2 hard disk Raid 1+0 or Raid 0, save it and reboot the machine.